MTL Direct Drive Motors

SERIES

MTL — Direct Drive Motors series

Each series has its own configurator. Pick model variants and add them to your quote.

φ13 mm body, max 0.13 Nm torque; for micro motion in electronic-component grippers and robotic hands.

φ21 mm OD, φ2.6 mm hollow shaft, 144,000 C/R, max 0.13 Nm. For end-effectors and Zθ units.

MDH-20 with low-ratio planetary gear for extended torque. For small grippers and light-payload robot hands.

φ30 mm, hollow shaft can be tapped internally; rotary joint allows air-line pass-through.

Wider hollow-shaft (φ6) variant of MDH-30. Supports air-line pass-through via rotary joint.

φ40 mm, ideal for transfer θ axis and robot-wrist applications in production automation.

MDH-40 with φ12 mm inner bore. Cable, fiber or laser path can be routed through the shaft.

MDH-40 combined with a planetary gear; higher torque in the same body.

φ60 mm OD with a large hollow shaft; for robot joints and end-effectors.

φ70 mm OD, φ25 mm hollow shaft, 65,536 C/R, 3 Nm peak torque. For indexing and robot joints.

Geared combination of MDH-70 — high torque density for QDD (Quasi-Direct Drive) joints.

φ100 mm OD, 9.6 Nm peak torque — the highest torque class of the series.

Turntable-style DD motor; φ70 mm, max 3 Nm. A new standard for low-profile rotary actuators.