REH-30R Rulman Enkoder


Stokta kalmasa da sipariş verilebilir

Incremental, 6000 rpm, up to 2000 pulse

MTL REH-30R Roller Encoders

MTL presents the REH-30R series roller encoders. They all based on space-saving design and available in many types from ultra-small types to high-resolution products…


Supply voltage Voltage/Open collector:DC5V-5%~12V+10% DC24V±10%(open collector output only) Line driver: DC5V±5%
Current consumption 60mA or less( under no load)
Detection system Incremental
Output Output pulse number 200 400 500 1,000 2,000
Output pulse/1mm 1 2 2.5 5 10
Minimum resolution mm 1 0.5 0.4 0.2 0.1
Output phase A, B, Z phase
Output form Square wave
Output capacity Sink current: 20mA Residual voltage: 0.5V or less(at 10mA)
Maximum response frequency
(response pulse number)
Output phase difference A, B phase difference 90°±45°(T/4±T/8 Z phase T±T/2(see Output Waveform)
Waveform rise/fall time 2μs or less (output cable 1m or less)
Allowable load of shaft(electrical) Radial 19.6N(2kgf) 14.7N(1.5kgf)
Thrust 9.8N(1kgf) 4.9N(0.5kgf)
Maximum allowable revolutions(mechanical) 6,000r/min
Roller Outside diameter: φ63.67±0.01 Material: aluminum roll hard urethane rubber baked
Working ambient temperature/ humidity 0℃~60℃ RH35%~90% no dewing
Storing ambient temperature -20℃~80℃
Vibration resistance Durability 55Hz, double amplitude 1.5mm 2 hours each in X, Y, and Z directions
Impact resistance Durability 500m/s(2  about 50G)3 times each in X, Y, and Z directions
Cable Outside diameter φ4.2 5-core vinyl wire Insulated shield cable(length 1m)
Mass 400g

Check pdf for all details: 

MTL REH-30R Series Roller Encoders 
MTL Micro Encoder Selection Guide



Ağırlık 380 g
Boyutlar 56 × 80.5 × 72.6 cm

Based on 0 reviews

0.0 overall

Be the first to review “REH-30R Rulman Enkoder”

There are no reviews yet.