MGH Döner Mikro Enkoder


Stokta kalmasa da sipariş verilebilir

Outer Diameter φ32mm-φ44mm, Incremental , Square Wave Output

MTL MGH Micro Rotary Incremental Encoders

MTL presents the MGH series rotary encoders. They all based on space-saving design
and available in many types from ultra-small types to high-resolution products…

Supply voltage DC5V±10%
Current consumption 60mA or less(under no load)
Detection system Incremental
Output Output pulse number
(Standard)                                        (Pulse number/rotation)
40     300         1,000
50      360         1,024
60      400         1,200
100    500
125     512
200    600
250    800
40 400 1,000
50 450 1,024
60 500 1,200
100 512 1,500
200 600 1,800
250 720 2,000
300 800360 900
Output phase A, A, B, B, Z, Z phase*with CS signal U, U, V, V, W, W phase
Output form Square wave Line driver output
Output capacity V0L=0.5Vmax V0H=2.5Vmin I0=±20mA
Maximum response frequency

(response pulse number)

Output phase difference A, B phase difference 90°±45(°T/4±T/8) Z phase T±T/2  With CS signal(U, V, W) 4 poles, 60º phase difference 3 signals
Waveform rise/fall time 1μs or less ( with 0.5m cable)
Maximum allowable revolutions


Working ambient temperature/ humidity -10°C~70°C

RH35%~90% no dewing

Storing ambient temperature -20°C~80°C
Vibration resistance Durability 55Hz, double amplitude 1.5mm 2 hours each in X, Y, and Z directions
Impact resistance Durability 500m/s^2(  about 50G)  3 times each in X, Y, and Z directions
Cable Outside diameter φ4.2(φ6,8)8-core(19-core)vinyl wire Insulated shield cable length 1m(length 0.5m)
Mass 60g 150g


Allowable change amount of fitting shaft

MGH-20 Pulse number 100~200 250~600 800~1,200
MGH-30 Pulse number 100~300 360~1,024 1,200~2,000
Allowable eccentricity Radial ±0.02mm ±0.01mm
Thrust ±0.1mm ±0.05mm ±0.02mm


Check pdf for all details: 

MTL MGH Series Rotary Encoders 
MTL Micro Encoder Selection Guide

For other products please check product selection table: Rotary Encoders


Ağırlık 380 g
Boyutlar 56 × 80.5 × 72.6 cm

Based on 0 reviews

0.0 overall

Be the first to review “MGH Döner Mikro Enkoder”

There are no reviews yet.