MG Döner Mikro Enkoder


Stokta kalmasa da sipariş verilebilir

Outer Diameter φ22mm-φ31,6mm, Module Kit

MTL MG Micro Rotary Incremental Encoders

MTL presents the MG series rotary encoders. They all based on space-saving design
and available in many types from ultra-small types to high-resolution products…


Supply voltage DC5V±10%
Current consumption 30mA or less( under no load)
Detection system Incremental
Output Output pulse number (Standard)
〔Pulse number/rotation〕
100    500
200    512
250    600
256    800
300   1,000
360   1,024
400   1,200
100    600          2000
200    800
250    1,000
300    1,024
360    1,200
400    1,500
500    1,800
Output phase A, B, Z phase(Z=H)
Output form Square Wave
Output capacity Sink current:30mA
Residual voltage:0.5V or less(at 10mA)
Maximum response frequency (response pulse number) 100kHz
Output phase difference A, B phase difference 90(°T/4±T/8 Z phase T±T/2 )
Waveform rise/fall time 2μs  or less
Maximum allowable revolutions
(such that the maximum response frequency is not exceeded)
Working ambient temperature/ humidity -10°C~70°C
RH35%~90% no dewing
Storing ambient temperature -20°C~80°C
Vibration resistance Durability 55Hz, double amplitude 1.5mm 2 hours each in X, Y, and Z directions
Impact resistance Durability 500m/s(2  about 50G)  3 times each in X, Y, and Z directions
I/O terminals PCB through hole terminals
(refer to outside dimensions diagram)
Mass 10g or less 20g or less


Allowable change amount of fitting shaft

MG-20 Pulse number 100~200 250~600 800~1,200
MG-30 Pulse number 100~300 400~1,024 1,200~2,000
Allowable eccentricity Radial ±0.05mm ±0.02mm
Thrust ±0.2mm ±0.1mm ±0.05mm


Check pdf for all details: 

MTL MG Series Rotary Encoders 
MTL Micro Encoder Selection Guide

For other products please check product selection table: Rotary Encoders


Ağırlık 380 g
Boyutlar 56 × 80.5 × 72.6 cm

Based on 0 reviews

0.0 overall

Be the first to review “MG Döner Mikro Enkoder”

There are no reviews yet.