,

ME-12-P Döner Mikro Enkoder

MTL
Availability:

Stokta kalmasa da sipariş verilebilir


Outer Diameter φ20mm, Incremental , Square Wave Output

MTL ME-12-P Micro Rotary Incremental Encoders

MTL presents the ME-12-P series rotary encoders. They all based on space-saving design
and available in many types from ultra-small types to high-resolution products…

 

Specifications
Square wave Built-in multiplication circuit(×2・×4・×8・×16)
Supply voltage DC5V ±10% DC5V ±5%
Current consumption 40mA or less  (under no load) 60mA or less (under no load)
Detection system Incremental Incremental
Output Output pulse number

(Standard)

(Pulse number/rotation)

60              100
125(*) 200
256(*)300
360            500
600            900
1,000(*)
1,024(*)1,500(*)
1,800(*)2,000(*) 2,048(*)
EX 2,000×2(4,000)
2,000×4(8,000)
2,000×8(16,000)
2,000×16(32,000)
Output phase A, B, Z phase(Z=“H”) A, B, Z phase
Output form Square wave Square wave
Output capacity Sink current:20mA
Residual voltage:0.5V or less(at 10mA)
Open collector output:Load voltage DC13.2V max
Sink current:20mA max.
Residual voltage:0.5V or less (at 10mA)
Open collector output:Load voltage DC13.2V max
Maximum response frequency

(response pulse number)

100kHz Line driver output:50kHz×(by multiplication)
Voltage output・Open collector output:100kHz
Output phase difference A, B phase difference 90°±45° (T/4±T/8)
Z phase T±T/2(see Output Waveform)
Refer to the figure on the right
Waveform rise/fall time 2μs or less(output cable 140mm or less) 1μs or less(output cable 140mm or less)
Allowable load of shaft(electrical) Radial 1.9N(200gf) 0.98N(100gf) 0.98N(100gf)
Thrust 1.9N(200gf) 0.98N(100gf) 0.98N(100gf)
Maximum allowable revolutions

(mechanical)

6,000r/min 6,000r/min
Working ambient temperature/ humidity -10℃~70℃
RH35%~90% no dewing
-10℃~70℃
RH35%~90% no dewing
Storing ambient temperature -20°C~80°C -20°C~80°C
Vibration resistance Durability 55Hz, double amplitude 1.5mm 2 hours each in X, Y, and Z directions Durability 55Hz, double amplitude 1.5mm
2 hours each in X, Y, and Z directions
Impact resistance Durability 500m/s(2 about 50G)
3 times each in X, Y, and Z directions
Durability 500m/s(2 about 50G)
3 times each in X, Y, and Z directions
 

Cable

Outside diameter φ3 5-core vinyl wire
Insulated shield cable(length 1m)
Outside diameter φ3 5-core vinyl wire
Insulated shield cable(length 1m)
Mass 40g 40g

 

Check pdf for all details: 

MTL ME-12-P Series Rotary Encoders 
MTL Micro Encoder Selection Guide

For other products please check product selection table: Rotary Encoders

GIGAVAC GV200-CB-1

Ağırlık 380 g
Boyutlar 56 × 80.5 × 72.6 cm
Markalar

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “ME-12-P Döner Mikro Enkoder”

There are no reviews yet.