Döner Enkoderler, Enkoder
MAH-28 Döner Mikro Enkoder
Availability:
Stokta kalmasa da sipariş verilebilir
Outer Diameter φ40mm, Absolute
MTL MAH-28 Micro Rotary Incremental Encoders
MTL presents the MAH-28 series rotary encoders. They all based on space-saving design
and available in many types from ultra-small types to high-resolution products…
| Specifications | ||
| Supply voltage | DC5V±5％ | |
| Current consumption | 100mA or less（under no load） | |
| Resolution | 262,14（18bit） 524,28（19bit） 1,048,576（20bit） |
|
| Allowable rotation | 6000r/min | |
| Allowable load of shaft（electrical） | Radial | 14.7N（1.5kgf） |
| Thrust | 4.9N（0.5kgf） | |
| Working temperature/ humidity | －10℃～70℃／RH35％～90％ no dewing | |
| Storage temperature | －20℃～80℃ | |
| Vibration resistance | Durability 55Hz, double amplitude 1.5mm 2 hours each in X, Y, and Z directions | |
| Impact resistance | Durability 500m/s（2 about 50G） 3 times each in X, Y, and Z directions | |
| Cable | Outside diameter φ4.2 7-core vinyl wire Insulated shield cable AWG28（length 1m） | |
| Mass | 80g（excluding cable） | |
| Decoder Specifications | ||
| Supply voltage | DC5V ±5％ | |
| Current consumption | 60mA or less（160mA or less including encoder） | |
| Parallel data update cycle | 60μs（16.7kHz） | |
| Output circuit | NPN open collector output（when using parallel output) | |
| Output capacity | Sink current 20mA or less Load voltage 35V or less Residual voltage 0.4 or less | |
| Logic | Negative logic（H=0, L=1） | |
| Connection | Power supply and parallel signal output by P=2.54 header pins（see diagram below） | |
Check pdf for all details:
 |
MTL MAH-28 Series Rotary Encoders |
|
MTL Micro Encoder Selection Guide |
For other products please check product selection table: Rotary Encoders
GIGAVAC GV200-CB-1
| Ağırlık | 380 g |
|---|---|
| Boyutlar | 56 × 80.5 × 72.6 cm |
| Markalar |
Based on 0 reviews
Be the first to review “MAH-28 Döner Mikro Enkoder”
You must be logged in to post a review.
There are no reviews yet.