MTL ME-17-P Micro Rotary Incremental Encoders
MTL presents the ME-17-P series rotary encoders. They all based on space-saving design
and available in many types from ultra-small types to high-resolution products…
Specifications | |||
Supply voltage | DC5V ±10% | ||
Current consumption | 30mA or less(under no load) | ||
Detection system | Incremental | ||
Output | Output pulse number (Standard) (Pulse number/rotation) | 100 300 500 200 360 256 400 | |
Output phase | A, B, Z phase(Z=“H”) | ||
Output form | Square wave, voltage output only Pull-up resistance 10kΩ | ||
Output capacity | Sink current:20mA Residual voltage:0.4V or less(at 10mA) | ||
Maximum response frequency (response pulse number) | 50kHz | ||
Output phase difference | A, B phase difference 90°±45(°T/4±T/8) Z phase T±T/2(see Output Waveform) | ||
Waveform rise/fall time | 2μs or less | ||
Allowable load of shaft(electrical) | Radial | 1.9N(200gf) | |
Thrust | 1.9N(200gf) | ||
Maximum allowable revolutions (mechanical) | 6,000r/min | ||
Working ambient temperature/ humidity | 0℃~50℃ RH35%~90%no dewing | ||
Storing ambient temperature | -20°C~80°C | ||
Vibration resistance | Durability 55Hz, double amplitude 1.5mm 2 hours each in X, Y, and Z directions | ||
Impact resistance | Durability 500m/s^2(about 50G) 3 times each in X, Y, and Z directions | ||
Cable | Vinyl wire AWG28 150mm | ||
Mass | 20g |
Check pdf for all details:
MTL ME-17-P Series Rotary Encoders |
MTL Micro Encoder Selection Guide |
For other products please check product selection table: Rotary Encoders
There are no reviews yet.